[ Home > Accessories > Vehicle Enhancements > FSD/PMD Relocation Kit > FSD Calibration Resistor ]
Replace your old resistor, or carry a spare.
Match your old resistor to calibrate the FSD / PMD to the injector pump.
If you don't know your current resistor value, the #5 resistor is recommended and will work satisfactorially with all injector pumps.
Currently, only the #5 and #9 resistors are available. Select the number closest to your original value.
Copyrightę 2003 - 2017 BlueHummer Outfitters All rights reserved.
Hummer brand is registered by GM and/or AM General.
BlueHummer Outfitters is neither affiliated with nor endorsed by GM and/or AM General.
Last Update: July 3, 2017